Model of Soldier Camouflage Gloves
Camouflage gloves are sewn with the left and right inner lining as part of a five-fingered fleece fabric, fleece fabric is sewn. Fleece fabric, made from the outer edge of the fabric to the ankle and stitch width 8 + 2 mm is attached to the outer fabric using bia. The trimmings of the glove is made from the outer fabric. Soldier gloves, settings made from the outer fabric is sewn to the column width bien edge with 8 + 2 mm.
The sewing of soldiers gloves stitch with overlock sewn on side and finger merge, and the ends of the fingers between. Gloves so as to surround the wrist end with the zigzag stitch sewn rubber crumb.
Gloves are made from two layers of camouflage fabric. Setting the thumb side opposite to the side through which the fastener tabs stitch sewn to the wrists and seat the tire on the settings next column is erected. Setting column of the wrist where the sewn glove is made on one of the D-ring of the double hook.
Camouflage Gloves’s fabric Features:
Fabric floors should seleceted the painted and printed fabric face type of camouflage pattern. Camouflage grade 85% cotton, 15% made from continuous polyester filamant. S 2/2 twill fabric which is selected with 2 polyester yarn and warp after 30 cotton yarn. After used 11 cotton weft yarns, polyester 1, 1 cotton, polyester yarn.
Weft and warp in cotton yarns used should be doubled. The frequency of at least 32 weft yarns / cm, warp, at least 60 pieces / cm should be.
Tensile strength of the glove fabric in weft direction of at least 730 N, in the warp direction should be at least 1200 N. Tear strength weft direction at least 60 N, must be at least 60 N in the warp direction. At least 4-5 to dry friction color fastness. While wet should be at least four. Color fastness to weather conditions must be at least 4-5. Universal and commercial color fastness to washing shall be at least 4-5 fading. After five washing, color fastness flow of universal and commercial washing at least 4 should be at least 4-5 in fading.
Thirty thousand revolutions per subjected to the abrasion resistance test should be no interruption of the fabric warp and weft yarns. Size change gloves after washing more than 2% in weft direction must be more than 3% in the warp direction. The original form printed surface water repellency value should be maximum 4. After two washes, the water repellency value to the printed surface must be at least 3.
The original form printed surface water repellency value should be at least 4, after twenty wash oil repellency value should be at least 3.
Camouflage Gloves’s Fleece fabric Features:
Color tone differences between the camouflage gloves fabric should be at least 3-4. Type of material made of polyester fabric. Texture of the interior and exterior of the fabric used to have brushed knitted fabric. Loop / sequence frequency of at least 14 cm / cm, the bar must be at least 11 names often. Mass per unit area should be 200 + 20 g / m2.
After washing, the size change of the direction of maximum 2.5%, 2.5% should be the maximum size direction.
The color fastness to rubbing for dry must be least, least 4 wet while. Bursting strength should be at least 450kp A. Universal washing against, the flow of color fastness 4, must be in 4 fading. In 4 color fastness against sweat flow should be 4-5 fading. Characterized in that the antibacterial activity of the fabrics used in military gloves, after twenty washes bacteria to rate must be at least 65%.
The chemicals used to impart antibacterial properties to the glove fabric should not cause an allergic reaction.
Soldier Gloves Set Clip Features:
Glove color tone difference must be at least 3-4 of plastic. Size + - 15% tolerance should be.
D-Ring Features
Gloves used in color between the troops of the fabric gradation D-ring must be at least 3-4. The ring is made from painted metal. Sizes + - should be 15.
Hook Features:
Must be made of metal, gloves must be at least 3-4 tons of different colored fabrics.
Sewing Threads Features:
Gradation of sewing thread may be used for a maximum of 3-4 soldiers gloves.
Properties of the seat Tire:
Width should be 7-9 mm.
Elastomerically the full number of wires must be at least 10.